BonBloc compact - HIGHLIGHTS

Reasonably priced, control unit for decentralized wastewater treatment plants with integrated energy-saving stepper motor valve unit 

BonBloc® compact
Image is not available
BonBloc® compact
Image is not available
BonBloc® compact
Image is not available
previous arrow
next arrow
 

Reasonably priced, control unit for decentralized wastewater treatment plants with integrated energy-saving stepper motor valve unit 

BonBloc® compact
Image is not available
BonBloc® compact
Image is not available
BonBloc® compact
Image is not available
previous arrow
next arrow
 

HIGHLIGHTS

  • All relevant control functions within a compact casing
  • 4 motor-driven valves
  • 1 air inlet 3/4“ and 4 outlets 1/2“
  • Easily programmable via Excel®-Sheet
  • Up to 4 all-purpose relay outputs
  • GSM-module as option

Why use the BonBloc compact?

  • Outstanding price-performance ratio due to the integrated design and absence of 230V solenoid valves
  • Option of the BonBloc® compact with a reduced set of features
  • Easy to install and connect
  • Quiet valve operation
  • Saves approx. 95% energy compared to units using standard solenoid actuated valves
  • Up to 4 relay outputs offer a comfortable connection of accessory devices
  • Sequence program can be easily created and modified using Excel® table
  • Password protected system-menu provides access to manual control and easy changing of step times
  • IP54 casing, optionally UV-resistant for outdoor installation

IDEA

SBR wastewater treatment plants normally use a control unit and a valve module. These are installed separately and have to be connected using costly cables and connectors. The BonBloc® compact integrates both, the controller and the valves into a single compact and easy to install device. No more cable spaghetti! The unit is equipped with a reduced set of features than its bigger brother, the BonBloc®. Nevertheless it offers all the comfort you need for most of the applications at a very competitive price.

VALVES

Instead of conventional solenoid valves we use reliable stepper motors from the automotive industry. These new valves have been successfully tested since 2008 in real waste water treatment plants.Why stepper motors? First, they consume energy only during opening or closing of the valve, therefore saving 95% of energy when compared to conventional valves. That is about 90kWh per year or 15€, and the trend is rising. Secondly, our valves are, due to the smoother and slower movement, much quieter than solenoid actuated valves of other sewage treatment plant controllers.

CONTROL UNIT

Three buttons, three LEDs, an alphanumeric LCD display - regarding its operability our BonBloc® compact control unit for decentralized wastewater treatment plants leaves nothing to be desired. The device can be equipped with pressure and current sensing to monitor the compressor. Using the digital inputs up to three float switches or other signal sources can be connected (depending on equipment version). Up to four reliable relays can control the compressor and other devices (e.g. UV-lamp, dosing of chemicals). The GSM-module will reliably send SMS if any alarm occurs. The BonBloc® compact compact can even be remotely controlled and recalled by GSM. The BonBloc® compact control unit is also equipped with features, such as acoustic signaling of predefined conditions, a sequence program permanently saved in the EEPROM and a set of NiMH rechargeable batteries (or normal batteries) to ensure continuous signaling during power outage or the function of the GSM-module. All electrical connections are implemented using cost-effective and universally compatible screw type terminals.

TECHNICAL DATA

 

Attribute Value
Dimensions (l x w x h); weight 118 mm x 241 mm x 181 mm; 1.9 kg
Ambient temperature -20°C to +50°C
Protection classification / UV-Resistance (casing) IP 53 / UV-resistant casing as option
Functions, sequence program, alarms, GSMcommunication, display messages (also multi-lingual) All according to customer request and requirement. Sequence programs are designed and adapted by the wastewater treatment plant manufacturer by means of an Excel®-sheet. 
Display / LED Illuminated (backlit) alphanumeric LCD, additionally up to 3 LED (colors as requested)
Signal-inputs Up to 3 x digital inputs,
pressure sensor 0-400 mbar
Data interface RS-232 (using adapter-cable)
Electrical output According to customer request, up to 4 relays e.g. 230 V / 300 VA
Power supply during mains failure 2x NiMH rechargeable batteries (size AA), optionaly low-cost version with alkaline batteries, no rechargeable
Compressed air inlet 3/4" or 1" fittings
Compressed air outlet 1/2" or 3/4" fittings
Maximum pressure  450 mbar
Power supply 230VAC, 12W max.